CPVC resin is made of polyvinyl chloride (PVC) resin chlorination modification process, is a new type of engineering plastic. The product is white or light yellow, odorless, tasteless, non-toxic particles or loose powder. PVC resin after chlorination, irregular molecular bond increases, polarity increased, so that the resin solubility increases, the chemical stability is increased, so as to improv...

It is often heard that comparing PVC boards with Foamboard, many people do not know that the two are not only hard and soft. Next, we will explain the use, specifications and price of PVC board with Foamboard, as well as the difference between them. (left PVC version; right FOAMBOARD)FOAMBOARD by using PS particle foam from the foam plate core, pressed version, followed by PVC ven...

How to distinguish between PVC internal lubrication, external lubrication and internal and external lubricants? Lubricants are generally divided into internal lubricants, external lubricants and internal and external lubricants according to their specific role. External lubricant is...

The defect of extrusion pipe material and improvement Abnormal phenomenonreasonssolutionsSurface gloss(1) mold temperature is too low ‚ (2) the opening mold wall not clean (3) insufficient gas supply of compressed air or gas leakage(1) increasing the temperature (2) clean the mouth ...

Solid calcium zinc complex stabilizer can be used in some of the traditional use of lead salt field, large diameter pipes, electrical insulating materials. Because it belongs to "green environmental protection products, particularly suitable for pipe.

.Ca-Zn stabilizer not only can replace toxic stabilizers, such as lead, cadmium salt . Practice has proved that processing performance is good, and is equivalent to the lead salt stabilize.The thermal stability is a kind of good non-toxic stabilizers.

PVC material is PVC, it is one of the largest plastic products production in the world, cheap, wide application, polyvinyl chloride (PVC) resin as white or light yellow powder. It can't use alone and must go through modification. PVC is the white powder of amorphous structure, the brandization degree is small, the stability of light and heat is poor. Different additives can be added to different U...

Widely used in cosmetics, plastic hardy plasticizer, release agent, stabilizer, surfactant, rubber vulcanization agent, waterproofing agent, polishing agent, metal soap, metallic minerals flotation agent, softener, pharmaceuticals and other organic chemicals. JuBang Stearic Acid is widely used in PVC pipe,...

Lead salt stabilizers delay plasticization. Environmental stabilizers, such as calcium based stabilizers, advance plasticization.

Why must PVC processing plus PVC heat stabilizer? Now let Jubang manufacturer direct you announced: PVC is the most sensitive PVC industry, easily produced one of the thermal degradation of polymers.Pure PVC resin is very sensitive to heat.when heating temperature reached 90 degrees Celsius above, PVC resin will decompose slight heat. After the temperature reaches 120 ℃，PVC resin will release ...

Application of JuBang Chlorinated Polyethylene : Adhesives，Magnetics，Wire and cable jacketing，Hose and tubing，Coating，Infrared Absorption and Others

Our Stearic Acid is white granules.

This depends on area:Europe: profile = Ca/Zn, some Pb until end of next year; pipe Ca/Zn, OBS and some Pb until end of next yearChina; CIS: Mainly Pb but already some above mentioned alternativesNorth America: Mainly Tin, no Pb, rarely Ca/ZnAustralia: Ca/Zn, OBS.Africa/Arabia: Mainly PbTurkey manket: There is a significant trend to switch to Lead-free, stronger than in Arabian area less strong com...

Three types: CPE, Acrylate and ABS based.Better Impact at low dosing : ABS is good, but poor UV stabilityNeeds better UV Stability : Acrylate best.CPE more dosing is required to have Impact strength similar to what you get with Acrylate based.

To test CaCO3 content we need to use calcining method.In CPE, only CaCO3 can not be burned because it is inorganic material. After calcining CaCO3 is left as CaO and CaO is the ash.Molecular weight of CaO is only 56% of CaCO3, so if we want know the CaCO3 content, then use CaO weight divide 0.56.

Calcium Carbonate works as anti-blocking material in CPE.As we know, CPE 135A is a kind of thermoplastic elastomer. It needs anti-blocking materials to avoid agglomeration and keep flowable powder.Calcium Carbonate is also used as filler in PVC pipes or profiles. So using Calcium Carbonate as anti-blocking materials in CPE 135A is the best choice.

It depends on the customers’ requirements and weather condition.According to our national standard, there is at least 5% CaCO3 in CPE 135A. 5% CaCO3 can help CPE 135A avoid blocking problem at normal temperature while keep its good quality.But if the temperature very high, like in summer, we suggest to add more CaCO3 inside. Otherwise, it is easy to have agglomeration problem.

We have whitening agent OB-1.

Our factory produces 10 tons CPE135A in an hour.

Our PE wax is made of high molecular weight polyethylene.

You have to store them dry.

We supply two kind of Titanium Dioxide. They are Rutile Titanium Dioxide and Anatase Titanium Dioxide.

About 100 years.

We pack the CPE135A by woven bag. If your quantity is big, we can design the package you want.

Usually, we will provide a Quality Testing Report, it will contain the manufactured date.

You can get free samples for our products, or you can send us your products specifications and requests. We will offer you most suitable quality to you. We also accept loading supervision.

Titanium Dioxide is used as white coloring agent to improve heat resistance, light resistance and weather resistance.

Titanium dioxide is white powder, non-toxic, insoluble in water, diluted acid and organics.

It is mainly used as external lubricant of PVC pipe, profile, plate, etc.

Molecular weight of our PE Wax is 3200 on average.

The melting point of our PE Wax is 105℃。

It’s non-oxidized. PE Wax is actually a saturated fatty alcohol acid ester, it is white small granule or free flow powder and is nontoxic and odourless, it can not be dissolved in water, but dissolves in tributyl phosphate(TBP) and chloroform, it has the excellent dispersion and transparency, it can be used to produce all kinds of PVC products as a lubricant.

PE Wax is white flake or powder with high melting point, high hardness and high glossiness.

Our products will never expire if properly stored.

Both of them have their own advantages. Lead salt stabilizer has better heat stability and lower price; Ca-Zn stabilizer is non-toxic and more environment-friendly.

Ca-Zn PVC Stabilizer is white powder, while Lead Salt PVC Stabilizer white or yellowish flake.

PVC Stabilizer is used to enhance the heat stability of PVC resin for fear of thermal decomposition of PVC Resin in the processing.

We have two kinds of PVC Stabilizer, including Lead Salt PVC Stabilizer and Calcium Zinc PVC Stabilizer.

Our standard of PVC resin is GB/T 5761-2006.

Plastic woven bag with inner plastic bag, net weight 25kg.