1. The relationship between toughness and flame retardancy of PEOrdinary PE toughness is very good, better than PVC pipe. But the concept that everybody comes out is to be based on common PE tubing character.For coal mine pipe sources, flame retardant and antistatic.For antistatic PVC or PE, the insulation is good, the surface resistivity of up to 1012-15 Ω, need antistatic agent to reduce to 1 * ...

SPC floor main performance requirements1. Low shrinkage, warping and good toughness.2. Make sure that it is not easy to deform under various environments and has good locking tension and a certain peeling force between the substrate and the film. The performance mainly depends on the material type component processing technology equipment ability to decide.SPC processing requirements1. The stabili...

1. Excellent surface hardness and tensile strength of pipes, high pipe safety coefficient.2. Good aging resistance, normal service life of more than 50 years.3. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transportation.4. Small friction coefficient of pipeline, smooth water flow, not easy to block, less ma...

1. Excellent surface hardness and tensile strength of pipes, high pipe safety coefficient.2. Good aging resistance, normal service life of more than 50 years.3. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transportation.4. Small friction coefficient of pipeline, smooth water flow, not easy to block, less ma...

1. PVC copolymerPVC(vinyl chloride) and other monomer copolymer resin composition if there are polar or large groups of components, the copolymer thermal deformation temperature increases accordingly, heat resistance is better than PVC, heat resistant products were made. PVC softening temperature is 78 ℃, and vinyl chloride vinylidene chloride and vinyl chloride copolymer of methyl methacrylate, v...

I. cleaning of PVC floor1.Dry mop: remove dust and dirt from the floor. Use dry or wet yarn, microfiber or other dry mops available.2.Vacuum cleaning: use a vacuum cleaner to remove dust and loose dirt from the floor. In restricted areas, this cleaning method can be used instead of a mop.3.Slightly wet mop: the mop should be slightly wet with water or detergent first. The method is to squeeze the ...

Machine washAfter stopping for a long time, heat is turned on again, a lot of big and small black spots are easy to appear on plastic products, can not meet the quality requirements of products, these black spots are the carbon compounds after thermal degradation of residual plastics in the machine. The cleaning machine usually adopts the method of continuous extrusion with plastic, removing the p...

Plastic mould is a tool for plastic processing industry and plastic forming machine. According to the different molding methods, can be divided into different mold types.1. Injection moldIt mainly is the most widely used in the production of thermoplastic plastic products of a forming mold, injection mold corresponding processing equipment is injection molding machine, plastic first heated melting...

1, the more rigid the material is, the less likely it is to have deformation, and the more resilient it is, the more likely it is to undergo deformation. Toughness and rigidity are the attributes that reflect the degree of difficulty in the deformation of an object. The more rigid the material is, the less likely it is to undergo deformation, and the more resilient it is, the more likely it is ...

PVC because of the high cost performance, is widely used in the material, but the white sole often can appear the phenomenon of pale yellow, especially the summer high temperature weather change color, to prevent the sole color yellow, should first clear the reason of the color yellow, then suit the remedy to the case. One, precipitate out. Because the shoes with a large amount of plasticiz...

1, the stability is insufficient, it will affect the whole plate surface, the surface of the plate is yellow, and the foamed sheet is brittle. The solution is to reduce the processing temperature. If there is no improvement, the prescription can be adjusted, and the amount of stabilizers and lubricants can be increased properly. It can be changed one by one, so it is easy to find out the problem q...

PE is polyethylene plastic, its chemical properties are stable. It usually produces food bags and various containers, and is resistant to acid, alkali and salt solution. But it is not suitable to wipe or soak with strong alkaline detergent.PP is a polypropylene plastic, non-toxic, tasteless, can be 100 degrees in the boiling water soak deformation, no damage, common acid, alkali and organic solven...

We ensure that the goods are transported safely·We have a team of well-trained workers who assure prompt delivery.We have a wide network and a good rapport with the transporters that help us carry out our work smoothly.

We can provide very reliable freight forwarding service and help for all of your freight forwarding requirements. We ensure safe handling of the goods.

We not only offer sea freight, but also offer railway. When our customer want to export to Russia, we will suggest them do railway.

We can shoot a video of our factory environment to you. If you are convient, we can arrange our colleague video-conferences with you online to show the factory envirnment to you.

Our freight forwarding co-operates with us for a long time. You also can appoint your own freight forwarding company.

We will affer you formula to produce. We can introduce our co-operation manchine factory to you, they are professional in adjusting machine. And our engineer will co-operate with you.

Usually, we provide Commerical Invoice, Packing List, Bill of Loading. If your markets have any special requirements, let us know.

We ensure you fast respone, fast service. Emails will be replied in 12 hours, your question will de answered in time.

You may place an order and finish the deal on Alibaba Trade Assurance platform, Alibaba will provide across-the-board trade assurance.

Yes, of course. But the quantity ordered should be 20,000 bags minimum.

Yes, we can offer various certificate of origin as per customer’s requirement for free, such as FORM-E for Vietnam customer.

We may offer third -party test service, cost on buyers.We can also provide our ISO certificate and SGS certificate.

Yes, free formula will be provided for buyers for reference. We have many kinds of formula of PVC products, like PVC pipe, PVC plate and so on.

We will select best matching shipment forwarder for you, or you may appoint your own shipment forwarder.

1x20ft FCL is 17.5 MT; 1x40HQ FCL is 26 MT.

MOQ of PVC raw materials is 1X40HQ FCL, 26 MT, and mini order and LCL of PVC auxiliary agents are acceptable.

Yes, customers from all over the world are warmly welcomed to visit our factory. Customers just need to reserve in a week earlier and finish a Factory Visit Request Sheet, we will make an arrangement as per your request.

Payment currency is mainly US Dollar, but RMB is also acceptable.

(1) Payment=1000USD, 30% T/T in advance ,balance before shippment.(2) 100% L/C at sight: importer bank reputation will be survey before open L/C.

We will finish the delivery of goods within 5 working days upon receiving your deposit or payment.

Mainly Lianyungang and Shanghai Port. If you want other port, we can also offer.

Yes, we will provide Free Sample up to 25kg, freight on customers, however, we will reimburse the sample freight to our customers in following order(s).